الکترود RDE دیسک حلقه چرخان مدل RRDE3-A شرکت ALS ژاپن
نقد و بررسی تخصصی الکترود RDE دیسک حلقه چرخان مدل RRDE3-A شرکت ALS ژاپن
دستگاه الکترود دیسک حلقه چرخان RRDE -3A به منظور استفاده در الکتروشیمی مدولاسیون هیدروداینامیک و دیسک حلقه چرخان طراحی شده است. الکترود آن با قطر 7mm با شفت کوتاه از جنس استیل ضدزنگ به منظور ایجاد یک سیستم الکترودی حلقوی غلظتی کوچک که اندازه گیری بسیار دقیق از نوع مدولاسیون چرخشی و حتی قابلیت در سرعتهای مدولاسیون شعاعی و یا حتی نوع موجی را دارا میباشد.
RRDE-3A is electronically controlled by a proportional-integral closing loop circuit driving as an DC servo-motor. Electrodes are small and rapidly interchangeable. The unit also provides an adjustable valve system for inert gas purging inside the cell vial.
RRDE-3A is able to be operated as a stand-alone unit and directly controlled by CHI, BASi Electrochemical Analyzers or other instruments. When the analysis starts, a built-in gas control allows purging the sample. Besides, the access to glass cell is easy for rinsing, cleaning, and replacing the electrodes. It is easy to remove and replace the cell vial.
- Remote- and manual-controlled rotation
- Gas line connector is available
- Remote- and manual-controlled purge lines
- Mounted teflon holder is adapted for ALS reference and counter electrodes
- Cell lead connects to all potentiostats
- Open architecture for easy access to cell
- Operable as RDE and RRDE
- Remote- and manual-controlled rotation and gas purge
- Compact design & easy operation
Placement of the front panel components in RRDE-3A:
ALS Co., Ltd warrants equipment manufactured by the company to be free from defects in material and workmanship for a period of 90 days from the date of shipment. This assumes normal usage under commonly accepted operating parameters. ALS agrees to either repair or replace, at its sole option and free of part charges to the buyer, any parts of such instrumentation which, under proper and normal conditions of use, prove to be defective within 90 days from date of shipment.
Electrochemical cells and working electrodes are warranted for 30 days.
ALS neither assumes nor authorizes any person to assume for it any other liability in connection with the sale, installation, service, or use of its instrumentation.
All products manufactured by ALS are tested and inspected prior to shipment. Upon prompt notification by the buyer, ALS will correct any defects in warranted equipment by its manufacture either by return of the item to our factory, or shipment of a repaired or replacement part. ALS will not be obliged, however, to replace or repair any piece of equipment which has been abused, improperly installed, altered, damaged or repaired by others. Defects in equipment do not include decomposition, wear, or damage by chemical action or corrosion.
This instrument is manufactured, either wholly or in part, for research purposes only. Use in medical diagnosis is not intended, implied or recommended by the manufacturer. Use for this purpose and accountability for the same rests entirely with the user.
Limited obligations covered by this warranty include: In the case of instruments not of ALS manufacture, the original manufacturer’s warranty applies.
Shipping charges under warranty are covered only in one direction. The buyer is responsible for shipping charges to the factory, if return of the part is required.
Expendable items including disposable items such as working electrode, reference electrodes, source lights, panel lights, fuses, etc. are excluded from the warranty.