سانتریفیوژ Hettich مدل Rotofix 46 H

The ROTOFIX 46 H is the ideal centrifuge for research and industrial laboratories. It has a wide range of accessories for routine applications and also enables special tasks to be tackled.

This centrifuge can accommodate a number of special tubes, including ASTM (American Society for Testing Materials) tubes. It can therefore be used to perform ASTM tests.

The sample tubes can be centrifuged at the specified temperatures in the heatable ROTOFIX 46 H to carry out the standardized crude oil test procedure. Temperatures of up to 90°C can be reached with this centrifuge.

The sulphuric acid content of chrome baths can be determined using chrome bath tubes. The QA procedure is of interest not only to public and private test facilities, but also to operators of chrome baths who need to establish sulphate levels at regular intervals.

Rotor 5616 can hold Schlenk tubes, which are widely used in organometallic and co-ordination chemistry. Substances that have been prepared in Schlenk tubes can be separated through centrifugation.

The ROTOFIX 46 H is not a medicinal product within the meaning of the IVD Directive and therefore must not be used for medical analysis / diagnosis. The IVD Directive is valid throughout Europe and in other countries that have adopted it or use it as a basis for their legislation.

The ROTOFIX 46 H offers various features to make operation easier, such as:  

• Rotary opening mechanism so that the centrifuge can be easily opened and closed
• Ergonomic operating and information panel
• ۱۰ programmable memories
• The parameter combination last selected is retained after the centrifuge is switched off
• After entry of the rotor radius r in mm it is possible to switch between display of rpm and the relative centrifugal force (RCF) by pressing the RCF button
• The parameters can be rapidly entered and changed using the rotary button

The ROTOFIX 46 H contributes to safety in the workplace. This centrifuge offers the following safety features:

• Lid locking and latching mechanism
• Automatic rotor recognition
• Imbalance switch-off
• Emergency lid release
• Lid dropping prevention
• Motor overheating protection
• Chamber overheating protection

This compact centrifuge has attractive design features such as:

• Metal casing
• Metal lid
• Centrifugation chamber made of rust-free stainless steel
• View port in lid

Advantages

• This centrifuge can be used for special applications such as the crude oil test procedure specified by the ASTM, the manufacture of microfluidic chips and the quality testing of chrome baths.
• The ROTOFIX 46 H has a comprehensive range of rotors to hold special tubes and standard tubes up to 250 ml.
• The temperature can be set to any value in the range +10 °C to +90 °C (depending on the ambient temperature).
• Pre-heating function

Accessories

	Swing-out rotor, 6-place, for chrome bath tubes   Angle: 90° RPM max.: 2,000 min−۱ RCF max.: 917   Cat. No. 4619
	Angle rotor, 6 plcae, for Schlenk tubes   Angle: 45° RPM max.: 2,000 min−۱ RCF max.: 894   Cat. No. 5616
	Swing-out rotor, 4-place, for ASTM tubes   Angle: 90° RPM max.: 2,000 min−۱ RCF max.: 984   Cat. No. 4474  (“without carriers”)