بازخورد درباره این کالا
محصولات مرتبط
همزن مکانیکی دیجیتال IKA مدل RW 28 digital Package
همزن مکانیکی دیجیتال IKA مدل RW 28 digital Package
ناموجود
شیکر IKA مدل MS 3 digital
شیکر IKA مدل MS 3 digital
ناموجود
شیکر IKA مدل ROCKER 2D digital
شیکر IKA مدل ROCKER 2D digital
ناموجود
همزن مکانیکی IKA مدل EUROSTAR 200 control P4
همزن مکانیکی IKA مدل EUROSTAR 200 control P4
ناموجود
شیکر IKA مدل KS 501 digital
شیکر IKA مدل KS 501 digital
ناموجود
روتاری IKA مدل RV 10 CONTROL V
روتاری IKA مدل RV 10 CONTROL V
ناموجود
شیکر انکوباتور IKA مدل KS 4000 ic control
شیکر انکوباتور IKA مدل KS 4000 ic control
ناموجود
همزن مکانیکی IKA مدل EUROSTAR 20 high speed digital
همزن مکانیکی IKA مدل EUROSTAR 20 high speed digital
تماس بگیرید
شیکر IKA مدل MTS 24 digital microtiter
شیکر IKA مدل MTS 24 digital microtiter
ناموجود
شیکر IKA مدل Loopster digital
شیکر IKA مدل Loopster digital
ناموجود
شیکر انکوباتور IKA مدل KS 4000 i control
شیکر انکوباتور IKA مدل KS 4000 i control
ناموجود
شیکر لوله IKA مدل MS 3 basic
شیکر لوله IKA مدل MS 3 basic
ناموجود
همزن مکانیکی دیجیتال IKA مدل RW 47 digital Package
همزن مکانیکی دیجیتال IKA مدل RW 47 digital Package
ناموجود
همزن مکانیکی IKA مدل EUROSTAR 200 control
همزن مکانیکی IKA مدل EUROSTAR 200 control
ناموجود
شیکر انکوباتور IKA مدل KS 3000 i control
شیکر انکوباتور IKA مدل KS 3000 i control
ناموجود
شیکر IKA مدل KS 260 control
شیکر IKA مدل KS 260 control
ناموجود
شیکر IKA مدل KS 130 control
شیکر IKA مدل KS 130 control
ناموجود
همزن مکانیکی دیجیتال IKA مدل EUROSTAR 20 digital
همزن مکانیکی دیجیتال IKA مدل EUROSTAR 20 digital
تماس بگیرید

سختی سنج پرتابل Hanna مدل HI 9034

0 نفر
ناموجود
متاسفانه این کالا در حال حاضر موجود نیست. می‌توانید از طریق لیست بالای صفحه، از محصولات مشابه این کالا دیدن نمایید.
ناموجود

نقد و بررسی تخصصی سختی سنج پرتابل Hanna مدل HI 9034

سختی سنج پرتابل Hanna مدل HI 9034

  • دارای سه محدوده کاری
  • 0 تا 199.9mg/L
  • 0 تا 1999mg/L
  • 0 تا 19.99g/L
  • 100 ساعت کار مداوم با یک بار شارژ

HI9034 Multi-range Portable TDS Meter

The HI9034 is a rugged, portable TDS meter designed for use in a wide variety of environmental conditions. It is supplied with a four-ring conductivity probe to allow for three ranges of measurement. TDS readings are adjusted with Automatic Temperature Compensation (ATC), assuring users of consistent and accurate measurements of total dissolved solids.

Four-ring probe

Three measuring ranges

Automatic Temperature Compensation

Details

The measurement of total dissolved solids (TDS) indicates the amount of ions dissolved in a solution. The portable HI9034 TDS meter is suitable for use in applications as diverse as wastewater treatment, reverse osmosis, and HVAC. It offers three measurement ranges from 0.0 mg/L to 19.99 g/L with a ±۱% FS accuracy. The HI76302W four-ring probe that is supplied with the meter allows for a wide range of measurements with a single sensor. The probe also features a built-in temperature sensor to allow for Automatic Temperature Compensation from 0 to 50°C (32 to 122°F).

Features at-a-glance

Four-ring Probe – The four-ring probe that comes with the HI9034 offers a versatile and accurate solution for TDS readings. Four ring technology allows for a larger range of measurement within a single probe, whereas two probe technology is somewhat limited in the range in which it can measure. The probe comes with a protective PVC sleeve that assures durability when taking measurements outdoors.

Three Measurement Ranges – HI9034 offers three TDS measurement ranges. Each range has a dedicated button on the face of the meter, allowing users to easily switch between ranges when necessary. The meter is programmed to let the user know when their current reading is out of range, and a new range should then be selected.

TDS Factor – The TDS value in aqueous solutions is directly proportional to conductivity. The ratio between the two parameters depends on the solution being measured. The HI9034 has a set TDS factor of 0.5 that is common for many solutions, meaning that 1 μS/cm is equal to 0.5 mg/L (ppm) of TDS.

Automatic Temperature Compensation – Since temperature has such a dramatic effect on conductivity readings, having a meter that offers temperature compensated readings is invaluable. The probe of the HI9034 features a built-in temperature sensor that automatically accounts for the effects of temperature on a sample’s TDS reading in the range of 0 to 50°C (32 to 122°F). The temperature compensation coefficient, also known as β, is set at 2%/°C; this factor corrects the reading 2% for each degree Celsius change in the sample.

One-point Calibration –  The HI9034 can be calibrated at one point in a standard TDS solution. The calibration trimmer located on the top of the meter is easily adjusted to the correct calibration standard.

0/5 (0 Reviews)
شما هم می توانید در مورد این کالا نظر بدهید

برای ثبت نظر، لازم است ابتدا وارد حساب کاربری خود شوید. اگر این محصول را قبلا خریده باشید، نظر شما به عنوان مالک محصول ثبت خواهد شد.

افزودن نظر جدید